|
Post by nervejam on Feb 15, 2006 12:20:08 GMT
I'm after a replacement toggle switch for my JHS SD-1 synth drum. It's the filter mode switch.
Mine's never had the shaft on it, and it's kind of letting down the appearance of the thing, now that I have removed the *stupid* 1-12 stickers that the previous owner slapped on it. It works 100%, btw.. or did until I desoldered this switch.
It's a three-position thing, PCB-mounted, would have had eight pins plus the mounting lugs. Two pins are snapped off on mine (by jhs, not me..).
Dimensions are approx 25mm x 11mm, about 8mm depth inc pins.
It's possible that it is also used on some other 70s/80s kit as well..
It looks like this:
EDIT: DODGY URL LINKS REMOVED #huhsign#
Can anyone help?
|
|
|
Post by Dubsounds on Feb 15, 2006 12:58:57 GMT
|
|
|
Post by nervejam on Feb 15, 2006 14:25:00 GMT
Cheers!
|
|
|
Post by labouch on Feb 15, 2006 17:19:57 GMT
It looks a lot like the Roland 2 and 3-way switches used on JP4, JP6, JP8, etc. I think there was some on Ebay recently - Chipforbrains was the seller, if I recall. If not, try www.vintageplanet.nl - Senso is a nice guy! Edit - just looked on Ebay - try this
|
|
|
Post by Minimoog on Feb 15, 2006 17:34:54 GMT
Aye just like the switches on my Juno 60. Also look similar to the ones Moog used on the Rogue. Dunno about the pin orientations though. These are pretty damn similar no? Here
|
|
|
Post by nervejam on Feb 17, 2006 10:00:15 GMT
They look the same! But they've gone. Senso has an identical one, off a Teisco. (I've bought stuff from him before..) I need to make the order up to 15 Euros, though.. and I haven't really started on the HOHNER yet, so I don't know if I'll need anything for that..
|
|
|
Post by nervejam on Feb 20, 2006 15:08:55 GMT
Can't find anything else I need from Senso, so I've mailed chipforbrains. We'll see how that goes..
|
|