|
Post by hawthornewingo on Jul 29, 2010 18:20:44 GMT
hello everyone:
looks like a nice forum, here's my dilemma. I have a prophet 600 that i received DOA. Managed to fix some problems with the fuse, transformer and memory batt. The unit lights up, display looks good but no audio output, not even a little hiss or hum. I've checked all the d.c. supplies at every chip and they look to be correct. The reset lines and clock freq. look to be correct. Might I need a replacement system ROM chip??? Any expertise with the syth would be appreciated.
|
|
ethersine
Odyssey
Tortured artist with no talent
Posts: 89
|
Post by ethersine on Aug 1, 2010 1:09:52 GMT
Hello! Welcome to Dubsounds.
I have a P-600 also, but I'm sorry to say I can't help you with your problem.
BTW....This is the reception area where you are supposed to introduce youself. If you want technical help, there is a section specifically for that. You might have better luck posting your questions there.
Good luck!
|
|
|
Post by MrArkadin on Aug 1, 2010 16:36:21 GMT
Hello there. Don't want to go to off-section, but a good link is: www.winecountrysequential.com/I am trying to do a partial refurb on a Six-Trak (full refurb is out of the question as this was abused). It smells of fags, half the rubber buttons are missing and it actually had cigarette butts rammed in the underside of the keys to make them trigger!
|
|